|
Precision Endmill Grinding Machine:
Having opening type structure,adding operation space,enlarging grinding range,this sharpener can grind relief,cutting edge of
miller,drill,reamer,also can grind ball end milland tap guide cutting edgeby changing different attachment.This main part of
sharpener is made of excellent Aluminum,it has many features,such as light weight,resist rot,etc.It takes up advanced
international technique of air floating,the spindle rotate flexibly after being pressed,to minimize firiction.
Specification:
Easy to operate,grinding smoothly and steady.
Air bearing construction keeps high accuracy and life long.
| Applicable |
2,3,4,6 flutes HSS endmill.Carbide end mill |
| Capacity: |
(shank*blade*length):50*175*200mm |
| Table cross travel( x axis |
115mm |
| Table longitudinal travel(Y axis |
60mm |
| Table in-feed graduation |
0.02mm |
| Adjustment for wheel head |
+35degree~-5degree |
| Air bearing swivel |
360degree |
| Dia.of grinding wheel |
125mm*52mm*32mm |
| Air consumption |
:>0.63MP |
| Operation time |
complete in 2 minutes inculding setup time for 13mm 3 flutes endmill |
| Motor |
220V/0.25/50HZ/2800RPM |
12. Optional accessory available to grinding ball end mill and taps.
Radius grinding attachment:
Specification:
| Install T-shaped slot width |
12.7mm |
| Spring chuck |
5C |
| The minimum feed unit |
0.0005� |
| Maximum griding arc radius |
3� |
| Equal dividing |
30degree |
| Parallelish of work hole to base |
0.02/60mm |
| Radial run out of work hole center line(60mm for hole |
0.015mm |
Air bearing grinding attachment
Specification:
| Max. stroke of air bearing sleeve |
9 |
| Collect for work table |
5c |
| T-shaped slot width for table |
The minimum feed unit |
| Air consumption |
:>0.63Mpa |
| Tracheal joints |
1/4� |
| Turning angle |
360degree |
| Parallelism of workhole center line to abse surface |
0.015mm |
| Radius run out of workhole center line(60mm for hole |
0.015mm |
|
